Operation Lipstick on a Pig

[Clutch]

To many dam wires!

 

[fleming442]

icm

😕 misfire stayed on 3 after swapping plugs.......

 

[Clutch]

Eather it needs more intake pressure or more cylinders.... Must be a boost problem

 

[fleming442]

No, it needs to straighten up and act right or just break already, dammit! Test drive last night- ran fine, threw P0303, cleared it. Miss like hell this morning, light comes on, light flashes, beat on it like a rented mule, clears up, runs fine, light goes out.

Could a sticky injector throw a misfire code?

 

[TURNA]

yes and change that icm!!

 

[fleming442]

Not to be hard headed (but I totally am!); the ICM was replaced on install, so only has about 40k on it. I'd rather find an actual problem.

 

[TURNA]

did u grease it?

 

[fleming442]

Yep, diablocal grease all over that bizatch!

 

[1evilregal]

when I was still turning wrenches, I did see injectors cause misfire codes.... if it's dirty/clogged/sticking open, could cause a lean/rich mixture and misfire....

try swapping injectors, and see if same cylinder comes back.

 

[Clutch]

Jets? ... Secondary metering rods! ....no?