Pontiac Grand Lemans -79 twinturbo

[liquidh8]

I`m going to use some foam too inside the tank. Usually I have made som baffles, but this time I use this bucket style. Buckets capacity is about 1.06 gallon...

Frame is no problem to me, first I have get it to sandblasted, then some welding and more welding... 😀

There ya go. I went with a bucket of sorts when I did the tank for my Buick Wagon. It should work well, as should yours since it is in a bucket.

Looking forward to seeing your frame repairs.

 

[PGLM]

Bucket got a hat... 😀

 

[liquidh8]

That looks great. You can now add a few AN fittings too it for your pumps, and a return and vent. Looking good, I LIKE!

 

[PGLM]

That looks great. You can now add a few AN fittings too it for your pumps, and a return and vent. Looking good, I LIKE!

You read my mind, except i will use more basic fittings...(cheap) 😳 Edit. added picture of fittings
Btw, bucket will attach to that cover also...

 

[PGLM]

little progress... Fuel tanks top is warping quite badly because of the welds, it`s only 0.079" thick... 🙁 Frame is soon to be ready for sandblasting...

 

[PGLM]

I made some engine mounts and tube for tanks sender unit so it will work with the foam...
Frame is ready for sandblasting...

 

[pencero]

I guess when you are done building this car you will say it is 'Finnished' :wink:

 

[PGLM]

I guess when you are done building this car you will say it is 'Finnished' :wink:

I have to remember that...

 

[PGLM]

"new" rear coilovers with 130lbs springs... got them cheap... 😀 Need to replace bearings...

 

[motorheadmike]

I seriously love this build... at first I thought you were crazy, but then I saw you were Finnish (and all the pieces fell in place).

Definitely keeping an eye on this one. Good luck!