? To QP Ford 9 owners

[Doug Chahoy]

I’ll be doing that tomorrow morning .

 

[melloelky]

My ford went,everything goes on te axle.The seal goes on the axle,press the bearing on,press the steel ring on.

 

[500/600]

The steel ring is a secondary bearing retainer

 

[Doug Chahoy]

The steel ring is a secondary bearing retainer

That’s what I thought. In the vids I’ve watched the seal goes in the housing end .

 

[Northernregal]

They sent me the wrong seals for my billet F body ends when i got my axle. i tried to use the seals inside the axle and it was a no go. Ill see if i have pics tonight. If not ill be home tomorrow and post pics from my ford 9 service book.

 

[Doug Chahoy]

They sent me the wrong seals for my billet F body ends when i got my axle. i tried to use the seals inside the axle and it was a no go. Ill see if i have pics tonight. If not ill be home tomorrow and post pics from my ford 9 service book.

My seals seem to be ok, they slide in about half way. I just have to find a socket big enough to knock it all the way in. How did you press the bearing and retainer ring on?

 

[Northernregal]

My seals seem to be ok, they slide in about half way. I just have to find a socket big enough to knock it all the way in. How did you press the bearing and retainer ring on?

I didnt need a retainer because I had sealed big bearings. If I recall correctly. I'll get you a pic when I get home.

 

[Doug Chahoy]

I didnt need a retainer because I had sealed big bearings. If I recall correctly. I'll get you a pic when I get home.

Is your large bearing the same as I have pictured, or different?

 

[pontiacgp]

did you put an inner seal in before you installed the 3rd member? Without the inner seal they'll be a good chance of an axle leak.

 

[Northernregal]

I had this style. Big bearing sealed bearings. No internal seal.