I re-used them on mine too. No harm.
1983 Oldsmobile Cutlass Supreme Sedan LS Turbo Build
- Thread starter GroceryGetter83
- Start date
I re-used them on mine too. No harm.
Breather installed:
Painted steam vents installed w/ new gaskets:
Painted steam vents installed w/ new gaskets:
Picked up some Bassett Racing wheels, 15x8” with 4.5” BS:
36 year old car, no rust:
1.75” clearance frame side, 1” clearance body side:
Will definitely run 26” tires:
36 year old car, no rust:
1.75” clearance frame side, 1” clearance body side:
Will definitely run 26” tires:
Last edited:
Stance is right on, those rims are sweet. I love the old school Nascar look. Was thinking of doing that myself.
Turbo drain return (-10AN):
Pilot hole:
Tapped and threaded:
Flushed with oil to collect any (minor) shavings out the pan drain:
Supervisor for the job:
Pilot hole:
Tapped and threaded:
Flushed with oil to collect any (minor) shavings out the pan drain:
Supervisor for the job:
Might as well:
Torqued flex plate, 74 ft-lbs:
On its way:
Couldn’t get the motor mount bolts lined up alone, but it’s close:
Will attempt to finish this week!
Torqued flex plate, 74 ft-lbs:
On its way:
Couldn’t get the motor mount bolts lined up alone, but it’s close:
Will attempt to finish this week!
Similar threads
