watch slap shot first,see her topless w/Paul Newman..either way watch slap shot..
84' Cutlass pro touring build
- Thread starter Tony1968
- Start date
Happy Thanksgiving to all... don't think the Canadians among us celebrate today but be thankful anyway for the freedom to share our passion.
Working on the hood for a few days this week. Had 3 coats of high build primer and started blocking with 220 and on to 320 and 400. Before I finished blocking i figured I better cut in the vents in case I have any mishaps. Still have to dress all the cuts on top and underside. Vents are just dropped in obviously and not set perfectly. There is some leeway in all directions. Moving along.
Working on the hood for a few days this week. Had 3 coats of high build primer and started blocking with 220 and on to 320 and 400. Before I finished blocking i figured I better cut in the vents in case I have any mishaps. Still have to dress all the cuts on top and underside. Vents are just dropped in obviously and not set perfectly. There is some leeway in all directions. Moving along.
Final blocking done and 2 coats of sealer
The common answer but sometimes Mother Nature has a surprise for us.
Not going to wash it either?
Pretty sure they make some type of rain guard. Seen them for a few setups. Washing it shouldn't be an issue with judicious use of the hose.
A little water shouldn't be an issue. Time will tell.
I bought a set of these guys at a swap meet a while back that I’ll be using in my hood.
www.cervinis.com
They came with the trays/covers, but one could just as easily use this to keep water out.
How well do your vents line up with the underhood structure? Any fitment issues?
Mustang Hood Louver Inserts
www.cervinis.com
How well do your vents line up with the underhood structure? Any fitment issues?
Similar threads
