Re: Hydraulic clutch set up. Wish me luck.
Hey, Thanks for he support. My pedal pics are in my gallery. I used a hardened plate steel and cut it to fit.(with much difficulty) I just bolted it to the clutch pedal. Its crazy strong, but if i get the chance, i'm gonna cut the other brake pedal and shape it to fit the same way and weld it to the clutch pedal. I got these pedals from NPD the El Camino catalog. It list the 78 -87 El camino and has the full manual linkage set up. The only thing i did not like about the pedals was the fact that the pedals can only use a 7/16 thick by 5 inch long bolt. No room for any bushings. So i packed axle grease in it and it seems fine, but because it had bushings, i used my old brake pedal and cut the pad. they both have very little play, so i ok with it. The pedal action is flawless, but i'll be watching when i get the full pressure of the clutch on that pedal. I'm using a Zoom pressure plate and disc. Now i'm waiting to find a Flywheel. (Check out "307 out and 350 in what did i do wrong?" post)