Started making my own intake a few years ago. Recently pulled the project back out & got back to work.
Cut an LS1 manifold apart 3" up from heads. Matched 8 stainless tubes to shape.
Initial rough mock up.
Put a little more shape in the pipes, Made bell mouths (velocity stacks) & started making plenums form light gauge stainless. To be mirror polished when done.
Cut an LS1 manifold apart 3" up from heads. Matched 8 stainless tubes to shape.
Initial rough mock up.
Put a little more shape in the pipes, Made bell mouths (velocity stacks) & started making plenums form light gauge stainless. To be mirror polished when done.