BUILD THREAD Project long time coming

[Injectedcutty]

Spacers? My car has aftermarket arms and an old, crusty swaybar bolted to them. How far should the bar be spaced from the arms?

The spacer fits inside the control arm and prevents crushing the arm when tightening the sway bar down.

 

[Supercharged111]

The spacer fits inside the control arm and prevents crushing the arm when tightening the sway bar down.

Ahh, OK that makes sense.

 

[Streetbu]

Injectedcutty is correct. And for some reason they are hard to find.

 

[Tony1968]

Injectedcutty is correct. And for some reason they are hard to find.

Because many guys just tossed them in the trash 🗑

 

[pagrunt]

Because many guys just tossed them in the trash 🗑

In the salt belt some have returned to nature as dust too.

 

[scoti]

Spacers? My car has aftermarket arms and an old, crusty swaybar bolted to them. How far should the bar be spaced from the arms?

Spacers go into the lower arm channel to prevent the channel from collapsing when cranking down on the sway bar hardware.

 

[Streetbu]

I need some help guys. I need new doors. My current ones don't look too bad from the outside, but the bottom lip is SHOT and there is no repairing it. I need a pair, and also need the glass. I found some at DVAP but between their price, and freight I just can't spend that much. If it means I wait & save my pennies, then so be it. But right now they are at $1500 shipped which seems very high to me. Maybe I'm just out of the loop on used parts prices.
Any other ideas or leads?

 

[Supercharged111]

I need some help guys. I need new doors. My current ones don't look too bad from the outside, but the bottom lip is SHOT and there is no repairing it. I need a pair, and also need the glass. I found some at DVAP but between their price, and freight I just can't spend that much. If it means I wait & save my pennies, then so be it. But right now they are at $1500 shipped which seems very high to me. Maybe I'm just out of the loop on used parts prices.
Any other ideas or leads?

Try LKQ? They have a location near you? Freight is free with them if so.

 

[Streetbu]

Try LKQ? They have a location near you? Freight is free with them if so.

They don't have anything that old

 

[64nailhead]

Manual or power windows? Are you regulators good?