What did you do to your G-Body today? [2011-2018]

[MrSony]

Drove it. Slowly getting the qjet to like the cold weather. Two pumps, *wrrwrrr* va-whoom potatopotatopotatopotato

 

[MrSony]

Although the fast idle still needs tuned better. Not a van of two pumps, *wrrwrrr* va-WHAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHH
I work again, this time nights so my only time do it it besides my day off are after work. It's about 1700rpm, a touch too high. Gotta see what the lowest it will go without stalling out. Somewhere between 1100 and 1500 I think will be the ticket.

 

[pontiacgp]

Although the fast idle still needs tuned better. Not a van of two pumps, *wrrwrrr* va-WHAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAHHHHHHHHHHHH
I work again, this time nights so my only time do it it besides my day off are after work. It's about 1700rpm, a touch too high. Gotta see what the lowest it will go without stalling out. Somewhere between 1100 and 1500 I think will be the ticket.

you don't have to remove anything to get to the fast idle adjustment so get your phillips out and back off the adjustment screw to turn down the revs

 

[MrSony]

you don't have to remove anything to get to the fast idle adjustment so get your phillips out and back off the adjustment screw to turn down the revs

*flathead 😛
I dont feel like messing with it before work. I just dont do anything car related before work. I'll do it after work in the parking lot, though. Its kind of a pita in my case, with my carb sitting so low and my air cleaner being so big. I can reach it, but it takes some effort. Its just that the car has to be cold, and it is only cold at the same times I have free to mess with it before/after work or on my day off.

 

[TURNA]

Fixed the crack in the dash!!!!!!!!

 

[69hurstolds]

Fixed the crack in the dash!!!!!!!!

Now if you can just fix that crack in your azz...… 🙂

 

[joesregalproject]

Chased down every lead I had on door panels. Searched the entire country on searchtempest looking for a set. Even chased down a few local cars that have been sitting in yards and driveways for years and asked the owners if they would sell the door panels out of them. No one willing to let them go. I keep coming up empty. Eventually there has to be a set somewhere.

 

[pagrunt]

Chased down every lead I had on door panels. Searched the entire country on searchtempest looking for a set. Even chased down a few local cars that have been sitting in yards and driveways for years and asked the owners if they would sell the door panels out of them. No one willing to let them go. I keep coming up empty. Eventually there has to be a set somewhere.

Renick's Used Auto Parts 849 W Sunbury Rd, West Sunbury, PA 16061 (724) 283-2166

 

[Clutch]

Chased down every lead I had on door panels. Searched the entire country on searchtempest looking for a set. Even chased down a few local cars that have been sitting in yards and driveways for years and asked the owners if they would sell the door panels out of them. No one willing to let them go. I keep coming up empty. Eventually there has to be a set somewhere.

I must have missed it. What door panels are you looking for?

 

[joesregalproject]

Renick's Used Auto Parts 849 W Sunbury Rd, West Sunbury, PA 16061 (724) 283-2166

I'll give em a call, thanks!

I must have missed it. What door panels are you looking for?

I need a set of claret upper and lower door panels, for manual windows and locks.