What did you do to your G-Body today? [2019]

[TURNA]

Thought I had a rod knock so I took the engine apart. Found a broken weld for the windage tray that was hitting the crank. It’s going to the machine shop tomorrow to get checked out. View attachment 112942 View attachment 112943 View attachment 112944 View attachment 112945

nice hat!

 

[MTP-Madmat]

nice hat!

That’s a friend of ours and we are all pro gun

 

[Injectedcutty]

That’s a friend of ours and we are all pro gun

KY is a lax carry state and my M&P 2.0 agrees lol.

 

[MTP-Madmat]

KY is a lax carry state and my M&P 2.0 agrees lol.

AZ is the most lax state. But you have to deal with hot summers and perfect winters. So when everyone else is just getting their cars out for the season ours go into hibernation

 

[street sweeper]

Ran out of gas for the first time. Finally bit me not having a working fuel gauge. Luckily i was less than 2 miles from my house. Will be dropping the tank. Most likely replacing it and the sender but i will make the call once i get the tank dropped.

 

[Ribbedroof]

Overhauled the steering shaft. Gave it a good cleaning , fresh grease, and a new boot.

 

[DSPbuilt]

Finally got a little time with no rain in beautiful Miami. Removed the stock parts from the Cutlass.

 

[Injectedcutty]

Got my fuel pump ready for install. Still need to remove the A1000 and sell it, re install the cell and feed line, and some misc fuel line routing nonsense.

 

[383_GrandPrix]

Got my fuel pump ready for install. Still need to remove the A1000 and sell it, re install the cell and feed line, and some misc fuel line routing nonsense. View attachment 113071

That looks like quite the pump! What are the specs on it?

 

[Injectedcutty]

That looks like quite the pump! What are the specs on it?

It's just a Walbro 255, but I have AN adapter fittings since I already have AN line in the Cutlass. This one is the GSL392 listed in the chart....