What Did You Do To Your G-Body Today? [2020]

[MrSony]

Stopped being lazy and replaced the wiper switch with one I got off of a member of the CGBG facebook page. The little arm that contacts the plastic piece that activates the highbeam switch broke off. I also replaced the wiper lever. Wasn't as annoying as I thought it'd be to fish the wires in the column, but still annoying. Then my turnsignal flasher died. :[

 

[CopperNick]

Pulled the freshly painted lower pulley off the paint tree and bolted it into place on the balancer. Added the matching top pulley to the water pump but didn't nail it down because I would have had to install the fan assembly to do it and the pulley for the power steering pump is still drying from its coat of paint (May have to reshoot it due to lack of heat while the first shot got done) yeah, yeah, I know, pictures. All in due time...……………..

 

[88AZSS]

Started my de-chroming of the interior.

 

[pontiac guy]

Made the new base plate for my shifter and installed it. It exceeded my expectations and I'm pretty picky. This shifter is nicer than the Hurst on the T56 in my Firehawk.

If you have an internal rail shifter, go with Core. Well worth the cost

 

[Wageslave]

I took the Bonneville out for a cruise today, and picked up a radiator cap to replace my leaky one. When I got back, I pulled a wheel off to diagnose a squeal from the drivers side front wheel, and found that I am about due for front brakes. Since I already had the wheel off, I went around and visited all my grease fittings with the grease gun.

 

[SupremeSpeed]

Finally got around to getting the motor and transmission in today.

 

[RabbitHoleSS]

Still scraping undercoating off.

 

[oldsmobile joe]

Mounted up some new shoes for the cutlass.

 

[TURNA]

Mounted up some new shoes for the cutlass.
View attachment 145824

That is one sweet looking ride!

 

[oldsmobile joe]

That is one sweet looking ride!

Thank you