What Did You Do To Your G-Body Today? [2020]

[UC645]

Between the Holley kerfuffle and building a new shed I haven’t worked on it that much.
But I did get the floor repainted today!

Next is prep for the rear seat brace

 

[MalibuDavyou5]

whats the A/C - Heat Vent problem?

A/C only blows from the top of the Dash, A/C problem is a Vacuum issue.

 

[melloelky]

does it do that with the a/c setting only?or heat setting also?
i only ask because when these cars have a vacuum leak it defaults to defrost(windshield) and floor only.it's a fail safe.

 

[oldsmobile joe]

Got the G wagon lt1 swap running. Replaced the front clip and shimmed it. Started installing pw/ pl wiring harness in the back doors. Still need exhaust work and the cruise wiring finished, etc.

 

[Rus]

I put 2.5 inch mandrel exhaust on my 79 buick and put 3 inch mandrel exhaust on my 78 buick. Both have flowmaster go mufflers. Wow, do they sound much better.

 

[MalibuDavyou5]

does it do that with the a/c setting only?or heat setting also?
i only ask because when these cars have a vacuum leak it defaults to defrost(windshield) and floor only.it's a fail safe.

Yes to both A/c and Heat.

 

[Smack-it]

Cut the rust out and started getting it ready for paint this fall

 

[sixty7rs]

My attempt at a third brake light for the elco , not sure if I’ll keep it...

 

[Injectedcutty]

Picked up some braided wire loom and a trick little billet bracket today. I've been scheming on how to mount my post filter once I switch back to the stock tank. However I have the UMI shock brace which just happens to be a solid spot.
Got this Allstar bracket from my local speed shop and mocked it up with a spare filter. It's def gonna do the trick!...

 

[Northernregal]

Shopped and price checked.... researched....