Search results

Hello everyone. Before posting this I did my research and still haven't found my answers.Ok I have a 86 Monte ss with a newer style 350.on the 350 the spot to bolt a mechanical fuel pump is blocked off. So I'm thinking of getting a fuel tank out of a tbi Monte or a grand natti.reason I'm going...

I know there its a ton of info on serpentine swap on here but no one actually answers the question I need to be answered.I have done the serpentine swap already now I'm looking to connect my ac.the set up came of a 90 firebird.My question is what ac lines,ac accumulator and ac condensor is a...

I'm a little stumped.my question is how does the lamp on the hood function.I know the light connects to a wire that runs to the head light harness from the fuse block.But what makes it turn on?Is there some kind of switch.Thanks in advance for the help

OK I'm trying to figure out where this connector plugs in and if I need it since I'm no longer running the ecm.OK it comes from the fuse block 2 wires colored green/white and dark brown then they go to a connector then 2 wires come out of that connector colored light blue and dark brown.The...

OK here is what I got.86 Monte ss 350 Edelbrock intake and Edelbrock carb,hedman headers very basic and I'm planning to run a/c.OK to start off there is no ecm anymore.OK now i'm talking in reference to the harness that comes off the fuse block that goes to the alt,oil PSi gauge etc etc.my first...

can everyone post pics of there monte ss's.I'm thinking of getting rid of my ss i was hoping i could get some motivation to help me keep it.thanks here is mine.

I know this is for the oil pressure sender.but what does it do. does it control the oil psi gauge.or does the connector with one female input control the oil psi gauge...note i have already removed my ecm

2nd owner.i bought it from a little old lady for $1300 bucks.

is it possible to run a/c with in a 86 monte ss with no ecm.

It comes from out the fuse box harness into the engine compartment.It is light brown or tan and has 1 female input.HELP PLEASE AND THANK YOU

i just pulled the intake off this motor i got and found this.its it bad

Hows it going.Im about to remove my ecm.Reason being I'm running a non ecm controlled motor with Edelbrock carb and intake.and I'm using Auto meter gauges so I'm running no sensors and Im running a 200r4 once I remove the ecm the lock up function is not going to work on the transmission. so my...

Hello everybody I posted a thread easier this week but as I read it over I didn't add much info.so here i go again.I have a 86 Monte with a 350.Edelbrock carb electric choke, Edelbrock intake,serpentine set up with a/c.No cruise control.I'm using auto meter gauges so I'm not using any...

This is my snap on 90th aniv box.Only reason i bought this box cause it matched my paint scheme of my car.Show of your tool box people.

Ok i just got a new motor this weekend ran when pulled.I gave it a good cleaning.then i found the casting number on the passenger side of the block.i thought they were only on the drivers side.so i ran the casting number 14093638.it read 350 year 87-95 one piece rear seal. what gets me is that...

Well I'm in the process of painting my engine bay.Since everything is all out I'm thinking of trimming my wiring harness.when i had the car running it looked like a rats nest.So many wires and connecters that weren't being used. So its a 86 Monte ss with a 350.i have a auto meter gauge set so im...

how's it going.well i pulled the motor out my Monte got it on craigsllist trying get rid of it.gonna drop a crate motor in.i figure now that its out im going to paint my engine bay.i started last weekend pulling everything out. wireing harnes,master cylinder etc,etc.I'm gonna take my 3 inch...

Just finished my build 350,rebuilt heads,new oil pump,new headers,new cam,lifters,pushrods,holley intake,new holley carb,new timing gear.so i went to crank on the engine for the first time sounded good,but wouldnt run long it shut off.so i went to crank it on the next day and it started making...

I have a 86 monte carlo ss and i recently swapped my 2004r with a 700r4.My car is a floor shift originaly so after the swap i am having issues with my car going into gear when i shift from the floor.It will not go into gear.Has anbody else had this problem a little help please

I found some rebuilt center bolt heads that came of a 91 z28 camaro for 50 buck's.They are still in the plastic raping with new valves,springs,seals and they look mint.But what heads are clasified as vortec heads.thanks