BUILD THREAD 86 monte carlo ls basket case

Had a busy last week and block sanded the car and sealed and sprayed it. Turned out decent other than needing wet sanding to get some orange peal and dirt nibs out. I'm planning on painting some color and clearing this fall for a custom paint theme but this white will give a good base
 

Attachments

  • PXL_20250309_180728638.jpg
    PXL_20250309_180728638.jpg
    1.3 MB · Views: 11
  • PXL_20250309_180723987.jpg
    PXL_20250309_180723987.jpg
    1.5 MB · Views: 11
  • PXL_20250309_184226091.MP.jpg
    PXL_20250309_184226091.MP.jpg
    1.7 MB · Views: 14
  • PXL_20250309_184238938.MP.jpg
    PXL_20250309_184238938.MP.jpg
    1.6 MB · Views: 11
  • PXL_20250309_192038065.jpg
    PXL_20250309_192038065.jpg
    1 MB · Views: 14
  • PXL_20250309_192905178.jpg
    PXL_20250309_192905178.jpg
    1.9 MB · Views: 13
  • PXL_20250309_192926447.jpg
    PXL_20250309_192926447.jpg
    826.7 KB · Views: 9
  • PXL_20250309_205832287.MP.jpg
    PXL_20250309_205832287.MP.jpg
    1.3 MB · Views: 12
  • PXL_20250309_192033513.jpg
    PXL_20250309_192033513.jpg
    1.5 MB · Views: 12
While paints curing to put together I am starting my custom grill from a gen 1 S10 billet grill from ebay. I need to drill and rerivit the outer braces and mounting plates on . I'm going to add a center plate for my emblem to bolt to
 

Attachments

  • PXL_20250314_001209978.jpg
    PXL_20250314_001209978.jpg
    2.4 MB · Views: 12
  • PXL_20250314_001217984.jpg
    PXL_20250314_001217984.jpg
    2.5 MB · Views: 12
  • PXL_20250314_001215999.jpg
    PXL_20250314_001215999.jpg
    2.7 MB · Views: 12
  • PXL_20250314_001219667.jpg
    PXL_20250314_001219667.jpg
    2.9 MB · Views: 11
Got the grill finished, riveting the end braces and mounting plates. Used a cut off mounting plate in the center to put an emblem on. I think it needs blacked in around it and behind it but that will come after the rest of the paint job is finished . I like the recessed look much better than the Cadillac style grill these cars come with. The emblem is off and SS header panel
PXL_20250314_215430071.jpg
PXL_20250314_215437512.jpg
PXL_20250314_215710121.jpg
PXL_20250314_221108276.MP.jpg
PXL_20250314_221112073.MP.jpg
PXL_20250314_221114350.jpg
PXL_20250314_221119508.MP.jpg
PXL_20250314_221122559.MP.jpg
PXL_20250314_221134045.jpg
PXL_20250314_221138629.MP.jpg
 
Very nicely done, sir. That looks great!
 
Looks good, really come along way! I really like the LS front end ever since seeing this picture floating around.
 

Attachments

  • 84 monte base.jpg
    84 monte base.jpg
    134.9 KB · Views: 2
  • Like
Reactions: Drkuhar

GBodyForum is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor