BUILD THREAD 87 Cutlass EFI build: 9/13/23..NEW STUFF!
- Thread starter Injectedcutty
- Start date
Congratulations on cranking Scot just remember good help is always hard to find
Thanks Eric! Very true, luckily I have gearheads on either side of my house. The racecar builder is always a pleasure to have around.
His shop is climate controlled, full fab shop! This car got the back half crunched a few weeks back, he has it almost ready to go!!
I will humble brag too, I have full access to all his tools! Super nice guy that is very well respected for building some fast azz cars!!! He is a retired pipefitters and does racecars as a hobby...supposed to be retired from it too but he keeps taking work lol.
Looks like I have an ignition wire unhooked somewhere. The car has absolutely zero power other than cranking with key on. No fuel pump prime, no gauges, no fans, etc. I'm sure it's something simple, I'll have to dig in when I get home this evening!
Supposedly the company I bought the standalone harness from has had past issues with the 12V feed pink/black wire. There is a separate pink/black on pin47 of the harness that sometimes will not work unless bypassed.
Supposedly the company I bought the standalone harness from has had past issues with the 12V feed pink/black wire. There is a separate pink/black on pin47 of the harness that sometimes will not work unless bypassed.
Next time just fly me in, put me up for 6 months, pay me in Canadian dollars, and you'll know it was wired correctly.
That comes out to about 100 USD!!! Great deal! 🙂
Similar threads
