Calling All HID Users

[kustomss]

Well it turns out the ebay projector lights I got for Christmas were bleeding power over to the high beams. I switched back to sealed beams and the lights work like they should.

 

[pontiacgp]

those projector lites were probably another junk chinese product. I have the hella conversion lenses, they work great and lay down a nice beam and have never had a problem so I always recommend them.

 

[kustomss]

Well I got curious about this whole shorting issue, so I took the bulbs out of the projectors. Both were blown, and yes, the bulb in the picture is melted. I don't know how that is really possible, but it happened. HID stuff is on the way now

 

[kustomss]

After a lot of waiting for parts and running a bunch of wires, I got my HIDs in! I went for a test drive at midnight and the difference was amazing. I could see better and farther on low beams than I ever could on high with sealed beams. High beams are almost too bright, but I'll get used to it I guess. If you're thinking about HIDs, just get them. You won't be disappointed. I'll post pics tomorrow hopefully

 

[skulledmonte84]

So i figured rather than making my own "new tread" id ask on this one being that it's the newest one

Here's the kit i got the kit has ONLY 2 post plug
I got this FREE "cheap made as hell" clear FAKE PROJECTORS housings,with 8000k hid light bulbs an the 35 watt ballasts

I want to get the outsides ones now,What kit do i need ?

I don't want to hear all the BULLS **T about how cheap these are an what u got

Just PLEASE answer my question THANKS

 

[skulledmonte84]

Well it turns out the ebay projector lights I got for Christmas were bleeding power over to the high beams. I switched back to sealed beams and the lights work like they should.

mine are doing the same thing,i can unhook the aftermarket lights an there nice an bright,then when i hooked the aftermarket lights in they are dim My grounds are all great so i don't even want to hear about it lol

 

[kustomss]

For the outside, you need an H4 style projector housing and a bi-xenon HID kit. Those have a shield around the bulb that moves the beam direction when you go from hi to low beam. Like these:http://www.ebay.com/itm/55W-HID-BI-...Parts_Accessories&hash=item43c8af5519&vxp=mtr and http://www.ebay.com/itm/4x6-H4651-S...Parts_Accessories&hash=item2c8038409f&vxp=mtr Hope this helps

 

[skulledmonte84]

For the outside, you need an H4 style projector housing and a bi-xenon HID kit. Those have a shield around the bulb that moves the beam direction when you go from hi to low beam. Like these:http://rover.ebay.com/rover/1/711-5...0001&campid=5335822911&icep_item=291129742617 and http://rover.ebay.com/rover/1/711-5...0001&campid=5335822911&icep_item=191129731231 Hope this helps

Sweet, Yea i come across them same ones an wasn't sure if they were what i needed or not,They do have the 3 post plug in connector RIGHT ? The bulbs that i have, had the shields but i took it off cause they left a bad glare,now there no were near as bad.
I got these in mind ,2 different type of housing ? yea i like to be different Not sure how there going to look side by side but i like how they have the amber lights,an yea they just look like there black,There really not, that's just the reflections

 

[skulledmonte84]

Guys Post pics of how you mounted the ballasts,an wiring,trying to get some ideas,i think i am going to hide mine under the top plate in the air box part some were

 

[kustomss]

Yes, they have the 3 post plug. I mounted my ballasts to the air tunnel. I'll post pics tonight if I get a chance.