exhaust

  1. 80elky

    Exhaust suggestions

    I have a 1980 el camino with a 350 (planning on going 383 soon). I was looking for suggestions on how to update my exhaust setup. Right now, I have true duals going straight out the back. The biggest problem I have with this (aside from looks) is that sometimes the back of the car bottoms out...
    • 80elky
    • Thread
    • dual exhaust exhaust side exit tail pipe
    • Replies: 24
    • Forum: Exhaust
  2. synoptic12

    Exhaust Help Needed- Intermediate Pipe

    Lucky that an exhaust forum has been added. I'm adding a new exhaust system, including muffler. There seems to be only Walker exhaust pipes available. So, I purchased the tail pipe (43770) and intermediate pipe (47577). My question is what is the "cut-off" bracket on the intermediate pipe and...
    • synoptic12
    • Thread
    • exhaust exhaustbracket intermediatepipe
    • Replies: 5
    • Forum: Exhaust
  3. FluoFerret

    Exhaust Manifolds

    Hello! I am looking to install a new exhaust system on my 78 Lemans, and I need some help, as my thoughts are stuck and I can't make up my mind. Here's what I am stuck with: Engine is a "mild performance" 350cui Chevy Small Block with a 600cfm Edelbrock Carb. Options for the exhaust system...
  4. R

    Stock v6 Malibu wagon exhaust

    Does anyone have pictures of their factory exhaust exit and size on a Malibu wagon. Thanks
  5. 4Speeds4Ever

    Header/exhaust decision...

    Hey guys, Long time lurker, first real post on this forum. I have an '81 Calais with a 260 - and as all you fellow 260 owners know, it has to go. I bought a 1970 Olds 350 from a reputable friend who knows his stuff - it's a clean mild build that will be tons of fun for a cruiser and will...
  6. CaliWagon83

    Exhaust attaches to frame or body?

    Hi All! So...Actually considering DIY-ing a lot more of my restomod if I can find a house with a workshop (or room for one). The prices on two-post lifts are actually not that bad, so if I can get approval for one where I move to, I'm thinking of trying to do the body/frame separation myself...
  7. DylanOrbanski

    Cutlass Supreme Exhaust System Questions

    Hey Gbody Crew, I wanted to order this 2.5” dual exhaust system from Jeggs for my 1979 Olds Cutlass Supreme Brougham, but upon looking at the website it says it doesn’t fit on the Cutlass Supreme. I posted the question on the Jegg’s site and I got a response that the Cutlass Supreme Sub-Frame...
  8. CaliWagon83

    Cats or no cats?

    Just curious how many of you still run catalytic converters on your G-bodies. For those of you outside California and other states with strict smog laws, it's probably an easy decision, but for those of us living in Peoples' Republics, it's "living dangerously" to go cat-less. Also, what engines...
  9. commandercool86

    El Camino Headers

    1987 Elco, dropping in a 383 soon and was looking for suggestions on headers that would be best for my build. Shorties, long tube, medium length? She'll be high revving, E-Tec 170 aluminum heads. 9.72:1 CR. Automatic, column shift, regular starter, g-force cross member. I've been reading around...
  10. oldmansmonte

    Engine tick or exhaust tick? - UPDATED

    So I changed the oil on the Monte. Let it run for about a minute and I revved it up to about 2,500 rpm when I suddenly heard a ticking sound. Specs: Iron 350 w/vortec heads, flat tappet cam and lifters. Ceramic coated Flo Tech headers, split lock header bolts, 2.5 exhaust with high flow cats...
  11. LukeZ

    New exhaust

    So I finally got new exhaust. Night time is before, daylight is after. As you can see, my old pipes had about 3in of clearance from the pavement lmao. They were also bent to hell from hitting speed bumps, rusted a little, had the stock cat, and a QTP cutout that I thought was cool so I put it...
  12. Tyler J

    Side Pipes!

    I have a set of side pipes on my El Camino that originally came with fiberglass packed baffles that stretched the whole length of the car. When I did my motor swap, I wanted to squeeze every bit of power out of the new motor as possible so I decided to remove those restrictive baffles. Now I...
  13. 7

    FYI: Cross Over Pipe for the 260 Olds

    I got an exhaust leak on the left manifold. I found out that the flange rotted and caused the cross over pipe to slip a bit and caused an exhaust leak. First I thought the pipe needed to be replaced, but the 260 uses a smaller diameter pipe compared to the 350/307. It is under 2 inches! This...
  14. Pharozen

    Rocket 350: I need Headers and Exhaust Feedback

    I'm restoring a 1979 Cutlass Calais t-top with an Olds Rocket 350, 2004r trans, 2500 stall converter, edlebrock aluminum dual plane intake, edlebrock (chevy) carb 795 cfm, 3.73 posi traction rear-end, etc.... The next step in the process for me is to start looking at exhaust and header options...
  15. Matt Ulinski

    Intro and Various Questions

    Hey Guys, I bought a 78 Malibu a few months ago, and after running a 300hp 350 infront of my 200r4 decided to buy a 406 with trick flow heads and a slightly choppy hydrualic flat tappet. My dad and I swapped in the new engine last week and after drving it a little we've come to the conclusion...
  16. RegMan79

    New dual exhaust/emissions questions

    Hey everyone, got a 79 Monte, I'm thinking of ordering a new duel exhaust and headers kit from jegs. It's a bolt on deal set up. My only issue is I live in an emissions city and my car has a cat on it. The kit has no cats and not finding one that comes with them. I don't really want them anyway...
    • RegMan79
    • Thread
    • emissions exhaust monte carlo
    • Replies: 32
    • Forum: Exhaust
  17. Petrocellie

    Winter Build hell and suggestions

    What's going on guys, I'm starting my winter build. I've got a 350 I'm building to a 383 to put in my 82 Monte. With the 350 I ran 2.5 inch single exhaust. With the 383 I want to run 2.5 dual exhaust with Pypes x Pipe. Can I do this without getting the double humb crossmember. I'm on a tight...

Please support GBodyForum Sponsors

Classic Truck Consoles Dixie Restoration Depot UMI Performance

Contact [email protected] for info on becoming a sponsor

Top Bottom