Bracing body to remove from frame

[pontiacgp]

when I slid the frame out I used 4 spares (donuts). Their low profile made it easier

 

[pontiacgp]

We used a laser light when making frames for our race cars to make sure they stayed straight. You could make a holder for a laser tool on the rear deck where the seats are in 3 locations, each side and in the middle and make a mark in the firewall where the laser light hits. Then as you are replacing parts you could check with the laser to make sure the car was still straight...

 

[joesregalproject]

We used a laser light when making frames for our race cars to make sure they stayed straight. You could make a holder for a laser tool on the rear deck where the seats are in 3 locations, each side and in the middle and make a mark in the firewall where the laser light hits. Then as you are replacing parts you could check with the laser to make sure the car was still straight...

Steve that's a great idea. I'd know for sure if something moved that way.

I'm gonna pick up some 1" square tube steel later this week and start trying to put this together.

 

[pontiacgp]

we don't want you end up with something like this.... 🙂

 

[joesregalproject]

we don't you end up with something like this.... 🙂

Yeah I'm not really going for that look... 🤣

 

[ck80]

Yeah I'm not really going for that look... 🤣

If memory serves, you were more of a "Pittsburgh squat" sort of guy