What did you do to your G-Body today? [2011-2018]

[pontiacgp]

was working on putting it back together...

Where'd the Turbo Coupe hood scoops go?

Looks killer btw...

Did your hood come with the chrome strip down the middle? i was thinking of deleting mine

Mine did but that hood is from an 81 so it had no chrome strip down the middle. I just had to fill in the holes in the header panel

 

[454cutlass]

got new new springs installed.. old ones sat on bumpstops pic below

 

[pontiacgp]

I just got the windshield installed and that rubber surround looks pretty nice. I have to add a little metal in the radius at the top corners since the rubber is just a little short...I must have missed something on the mock up or the two windshields have a different radius on the top corners..oh well

 

[lildhix]

Zip tie stuff

 

[Longroof79]

I just got the windshield installed and that rubber surround looks pretty nice. I have to add a little metal in the radius at the top corners since the rubber is just a little short...I must have missed something on the mock up or the two windshields have a different radius on the top corners..oh well

========================================================================================================
Steve,
I'd like to see a pic or two of how it looks. I'm considering ditching the metal windshield mouldings. Were these universal strips, or from a particular type of car? I might have asked you once before.
Also, what keeps the strip in place? As we know, the metal strips were held in by clips.

 

[pontiacgp]

I'll get some tonite...for $5 a piece...

 

[SonOfRDgear]

replaced front pump seal on transmission, finished painting motor & bolted up intake and carb, put torque converter back in...

would have started to bolt the engine up but it started to rain 🙁

 

[DRIVEN]

Just walked past it and sneered.

I'm still pissed about the mystery dent in the fender. It hasn't even been started in probably 3 months. Lame.

 

[pontiacgp]

I just got the windshield installed and that rubber surround looks pretty nice. I have to add a little metal in the radius at the top corners since the rubber is just a little short...I must have missed something on the mock up or the two windshields have a different radius on the top corners..oh well

========================================================================================================
Steve,
I'd like to see a pic or two of how it looks. I'm considering ditching the metal windshield mouldings. Were these universal strips, or from a particular type of car? I might have asked you once before.
Also, what keeps the strip in place? As we know, the metal strips were held in by clips.

They are universal and they have a channell the window sits in. You'll see at the top corner how the rubber folds in a bit. If you click on the picture it'll enlarge a bit. If you want more or bigger pictures I can email them to you. I'll have to fill the cavity with some silicone until the winter when I'll weld some metal in there. I had a blast driving it tonite.. 😀

 

[anakputa]

Drove it 45 miles to work and back...V-6 springs and 27 year old suspension SUCKS!! This winter a whole new suspension :lol: