cutlass

Hey looking for some help with my 1980 cutlass calais . currently has a stock 305 with a th350. It recently developed a problem when shifting into gear the rpm's would drop severely almost like it was missing a cylinder but if you touch the throttle it was fine . i thought possible vacumn leak ...

Sorry it’s not a great pic, but spied this clean Cutlass lowrider in Lake Forest, California on the way to dinner tonight. Still needed a front bumper, but seemed in great shape overall. Clean Cutlass Lowrider, Lake Forest, CA by CaliWagon83 posted May 9, 2018 at 7:17 PM

I have an 84 Cutlass Supreme with the stock 307/TH200C. I overhauled the transmission last year, and after I ran it for a while, I noticed some large metal shavings in the pan, coming from the stator support bushing. I pulled the transmission again to remove the metal, and after removing the valve body, I...

any ls gbodies roller or stock swaps on here for sale ?? Al/Ga/Fl/Miss/Tenn area

Just joined the community I have ben having a problem with my 1987 cutlass, it wont start already checked the battery, connectors are fine, and starter looks fine. The only thing it could be is the fusible link, I would appreciate help with where the fuse is located and the steps. thanks alot...

I have a 1987 cutlass for sale with t-tops no rust clean as a whistle in the chicago land area

Hey guys/girls, New to the forum here and got a quick question, I purchased my 1979 Oldsmobile Cutlass Supreme Brougham in May of 2017 and I love the car to death. The paint going to hell but the car is rust free and mechically sound, which is a really good find for up here in Manitoba...

It mentions a 4 bolt cover. My 78 Olds, has a round top with no cover. My 78 Camaro has a 4 bolt cover, but the Olds is much different. Rock Auto list the following but do not show the top: http://www.rockauto.com/?carcode=1222063&parttype=7416 But looking at that list again, I see this...

I can't Find the engine oil dipstick. Can someone point me in the right direction. I have located the transmission oil dipstick it's on the passenger side right behind the valve cover but I don't see the engine oil dipstick.

Was at a car show at the local Ford dealership today. Saw a really nice Olds, and thought you guys would appreciate it! My favorite part is the Lightning Rods

Well, since the wagon is now in paint, it have to start thinking about what it am going to do for the lower air damn. Since it am running the LC2 engine, and using a precision stock location intercooler, it want to fab something up similar to the Grand National. Any one have any photo ideas...

How do I go about changing the speedometer/odometer cable on my '79 Cutlass Supreme Brougham? Do I need any special tools? I changed out the cruise control module and it didn't fix the problem. The problem is that the speedometer, odometer and cruise control do not work. Any advice would be...

Recently had my alternator and battery crap out on me (voltage regulator went and boiled the battery) so decided to upgrade to a CS144. I bought the plug WITH the resistor in it as I was not sure which to get as I have a cutlass with the rally gauges but it also has the CHARGE light so I thought...

Does anyone know where I can get a printed circuit board for my 1986 Cutlass Supreme? The one I currently have is corroded in some areas.

So Ive been messing with the 87 442 off and on through the winter, I had a feeling when I bought it that the car has a few electrical gremlins... Upon purchase the check Engine light was on... I didn't have my dx tools with me, but figured it was nothing major and took a gamble... Found out the...

I have a 1986 Oldsmobile Cutlass Supreme Brougham, with the 307 5.0 V8 and 4bbl rochester quadrajet carb. I just replaced the cylinder heads and gaskets. It has some issues, but it's mine so I'm trying to figure it out a little at a time. Hopefully I can find some ideas here. I need the air...

I have a 1986 Chevrolet Monte Carlo SS and I just bought an Avital alarm system that I intend to install myself. I need to know what wires to splice or tap for the starter, horn, lights, door switches, electric locks, and electric trunk release. I've installed audio equipment numerous times in...

Hey everyone, how's it going? Hope you all had a wonderful Thanksgiving. I'm new to this site, well officially anyway. I've read many articles on here as a nonmember, but decided I should become part of the family. So here I am. I'm one of the rare 4 door Cutlass Supreme owners. I picked the car...